Seunghwa Kwon and David P. Cann, Influence of the processing rate and sintering temperatures on the dielectric properties of CaCu3Ti4O12 ceramics, J. Electroceram. (in press) [DOI 10.1007/s10832-009-9563-1]

S. Kwon, C.-C. Huang, M. A. Subramanian, D. P. Cann, Effects of cation stoichiometry on the dielectric properties of CaCu3Ti4O12, J. Alloys. Comp. Vol. 473, Issue 1-2, 2009, p. 433 - 436.

Christopher S. Dandeneau, Yu-Hong Jeon, Christopher T. Shelton, Tom K. Plant, David P. Cann, and Brady J. Gibbons, "Thin film chemical sensors based on p-CuO/n-ZnO heterocontacts," Thin Solid Films (In Press).

A. Prasatkhetragarn, M. Unruan, A. Ngamjarurojana, Y. Laosiritaworn, S. Anatan, R. Yimnirun, and D.P. Cann, "Effect of Zr/Ti ratio on dielectric and ferroelectric properties of 0.8(Pb(ZrxTi1-x)O3-0.2Pb(Co1/3Nb2/3)O3 ceramics," Current Applied Physics, Vol. 9, Issue 4, 2009, p. 802 - 806.

M. Sutapun, N. Vittayakorn, Chien-Chih Huang and D. P. Cann, “Phase transitional behavior and dielectric properties of lead free (1-x)(K0.5Na0.5)NbO3 - xBi(Zn0.5Ti0.5)O3 ceramics,” J. Alloys. and Compounds. (In Press).

C.-C Huang, N. Vittayakorn, and D. P. Cann, “Structure and ferroelectric properties of Bi(Zn1/2Ti1/2)O3-(Bi1/2K1/2)TiO3 Perovskite solid solutions,” IEEE Transactions in Ultrasonics, Ferroelectrics, and Frequency Control. (submitted).

C.-C. Huang, N. Vittayakorn, A. Prasatkhetragarn, B. J. Gibbons and D. P. Cann, Phase Transitions and Dielectric Properties in NaNbO3-Bi(Zn1/2Ti1/2)O3 Perovskite Solid Solutions, Japanese Journal of Applied Physics (submitted).

P. Ketsuwan, C.-C Huang, S. Ananta, R. Yimnirun and D. P. Cann, Phase Formation and Dielectric Properties of Ba(Zn1/3Nb2/3)1-xTixO3 Solid Solutions, Solid State Commun. (in press)

C.-C. Huang, and D. P. Cann, Phase Transitions and Dielectric Properties in Bi(Zn1/2Ti1/2)O3-BaTiO3 Perovskite Solid Solutions, J. Appl. Phys. 104, 024117 (2008).

W. Banlue, N. Vittayakorn, C.-C. Huang and D. P. Cann, Dielectric properties of Pb[(1-x)(Zr1/2Ti1/2)-x(Zn1/3Ta2/3)]O3 ceramics prepared by columbite-(wolframite) methods, J. Mater. Sci 43, 4220 (2008).

Seunghwa Kwon, Chien-Chih Huang, Eric A. Patterson, Edward F. Alberta, Seongtae Kwon, Wesley S. Hackenberger, and David P. Cann, The effects of Cr2O3, Nb2O5, and ZrO2 doping on the dielectric properties of CaCu3Ti4O12, Mater. Lett. 62 (2008) pp. 633-636.

C.-C. Huang, D. P. Cann, X. Tan, and N. Vittayakorn, Phase transitions and ferroelectric properties in BiScO3-Bi(Zn1/2Ti1/2)O3-BaTiO3 solid solutions. J. Appl. Phys. 102, 044103 (2007).

E. A. Patterson, S. Kwon, C.-C. Huang, D. P. Cann, Effects of ZrO2 additions on the dielectric properties of CaCu3Ti4O12, Appl. Phys. Lett. 87, 182911 (2005).

David P. Cann, Eric Patterson, Seunghwa Kwon, Chien-Chih Huang, and Steve W. Martin, “High-K CaCu3Ti4O12 Dielectrics,” Proceedings of the 12th US-Japan Seminar on Dielectric and Piezoelectric Ceramics, to be held Nov 2005, Annapolis, MD.

Naratip Vittayakorn, Gobwute Rujijanagul, Xiaoli Tan, and David P. Cann, “Piezoelectric property of (1-x) Pb(Zr1/2Ti1/2)O3 -xPb(Zn1/3Nb2/3)O3 ceramics prepared by columbite-(wolframite) precursor method,” Proceedings of the 2nd International Conference on Advanced Materials and Nanotechnology, to be published in Current Applied Physics (2005).

Naratip Vittayakorn, Gobwute Rujijanagul, Xiaoli Tan, Meagen A. Marquardt, and David P. Cann, “Dielectric properties and morphotropic phase boundaries in the xPb(Zn1/3Nb2/3)O3-(1-x)Pb(Zr1/2Ti1/2)O3 pseudo-binary system” Journal of Electroceramics (in press).

Naratip Vittayakorn, S. Uttiya, Gobwute Rujijanagul, and David P. Cann, “Dielectric and ferroelectric properties of 0.3Pb(Zn1/3Nb2/3)O3-0.7Pb(Zr1/2Ti1/2)O3 ceramics substituted with Sr,” Journal of Physics D 38 [16] p. 2942-2946 (2005).

Wanwilai Chaisan, Rattikorn Yimnirun, Supon Ananta, Tawee Tunkasiri, and David P. Cann, “Dielectric properties of lead zirconate titanate-barium titanate ceramics prepared by a modified mixed-oxide method,” Materials Letters (in press).

David P. Cann, Seymen Aygün, Xiaoli Tan, Jon-Paul Maria, “Effects of processing condition on the dielectric properties of CaCu3Ti4O12,” Journal of Electroceramics (in press).

Wanwilai Chaisan, Rattikorn Yimnirun, Supon Ananta, and David P. Cann, “The effects of the spinodal microstructure on the electrical properties of TiO2-SnO2 ceramics,” Journal of Solid State Chemistry 178 [3] p. 613-620 (2005).

Naratip Vittayakorn, Gobwute Rujijanagul, Xiaoli Tan, Meagen A. Marquardt, and David P. Cann, “The morphotropic phase boundary and dielectric properties of xPb(Zr1/2Ti1/2)O3 – (1-x)Pb(Ni1/3Nb2/3)O3 binary solid solution” Journal of Applied Physics 96 [9] p. 5103-5109 (2004).

Naratip Vittayakorn, Gobwute Rujijanagul, Tawee Tunkasiri, Xiaoli Tan and David P. Cann, “Influence of processing conditions on the phase transition and ferroelectric properties of Pb(Zn1/3Nb2/3)O3-Pb(Zr1/2Ti1/2)O3 ceramics,” Materials Science and Engineering: B 108 [3] p. 258-265 (2004).

David P. Cann, Xiaoli Tan, Naratip Vittayakorn, Gobwute Rujijanagul, and Tawee Tunkasiri, “Influence of Processing Conditions on the Morphotropic Phase Boundaries and Ferroelectric Properties of Pb(Zn1/3Nb2/3)O3-Pb(Ni1/3Nb2/3)O3-Pb(Zr1/2Ti1/2)O3 Solid Solutions” Proceedings of the 14th IEEE International Symposium on Applications of Ferroelectrics (ISAF-’04), August 2004, p. 274-277, (2004).

Naratip Vittayakorn, Gubwute Rujijanagul, Tawee Tunkasiri, Xiaoli Tan and David P. Cann, “Perovskite phase formation and ferroelectric properties of the PNN-PZN-PZT ternary system” Journal of Materials Research 18 [12] p. 2882-2889 (2003).

Seymen Aygün, Xiaoli Tan, Jon-Paul Maria, and David P. Cann, “Defect contributions to the anomalous permittivity in CaCu3Ti4O12 ceramics,” Proceedings of the 204th Electrochemical Society Meeting, Orlando, Florida, October 2003, (in press).

David P. Cann, Seymen Aygün, and Xiaoli Tan, “Dielectric properties of the distorted perovskite CaCu3Ti4O12,” Proceedings of the 11th US-Japan Seminar on Dielectric and Piezoelectric Ceramics, Sapporo, Japan, p. 153-156, (2003).

Clive A. Randall, Daniel E. McCauley, and David P Cann, “Finite size effects in a BaTiO3 ferroelectric glass ceramic,” Ferroelectrics 206-207 p. 325-335 (1998).

Atsuyuki Nakano, David P. Cann, and Thomas R. Shrout, “High dielectric constant NPO (negative-positive-zero) dielectric materials based on (100-x)(La0,1Bi0,9)Ti2O7-xSrTiO3,” Japanese Journal of Applied Physics 36 Part 1 [3A] p. 1136-1140 (1997).

Thomas R. Shrout, David P. Cann, and Atsuyuki Nakano, “High dielectric constant NPO materials based on (100-x)(La0,1Bi0,9)2Ti2O7-xSrTiO3,” In Proc. 17th Capacitor and Resistor Technology Symposium, Jupiter, Florida, p. 56-59 (1997).

David P. Cann, Clive A. Randall, and Thomas R. Shrout, “Investigation of the dielectric properties of bismuth pyrochlores,” Solid State Communications 100 [7] p. 529-534 (1996).

David P. Cann, Clive A. Randall, and Thomas R. Shrout,. “Anomalous low temperature behavior of bismuth pyrochlores,” In Proceedings of the 4th International Conference on Electroceramics and Applications, Aachen, Germany, 1 p. 83-86 (1994).

Kelley Markowski, David P. Cann, and Robert E. Newnham. “Structure-property relations in low permittivity dielectrics,” Ceramic Transactions 33 (Materials in Microelectronic and Optoelectronic Packaging) p. 227-242 (1993).

Meagen A. Marquardt and David P. Cann, “Synthesis and electrical properties of Cu(Ni1/2Ti1/2)O2,” Materials Letters (in press).

Meagen A. Marquardt, Nathan A. Ashmore, and David P. Cann “Crystal chemistry and electrical properties of the delafossite structure,” Thin Solid Films (in press).

Nathan A. Ashmore and David P. Cann, “Electrical and structural characteristics of non-stoichiometric CuGaO2 delafossite ceramics” Journal of Materials Science 40 [15] p. 3891-3896 (2005).

R. Bruce Gall, Nathan A. Ashmore, Meagen A. Marquardt, Xiaoli Tan, and David P. Cann, “Synthesis and properties of CuGaO2 delafossite ceramics,” Journal of Alloys and Compounds 391 [1-2] p. 262-266 (2005).

R. Bruce Gall and David P. Cann, “High temperature phase equilibria in the Cu2O-Ga2O3-In2O3 system,” Ceramic Science and Engineering Proceedings, 24 (4) p. 143-146, (2003).

Jane E. Clayton, Nathan A. Ashmore, and David P. Cann, “Synthesis and processing of AgInO2 delafossite compounds by cation exchange reactions”, Thin Solid Films 411 [1] 140-146 (2002).

Jane E. Clayton, Alan P. Constant, and David P. Cann, “Transparent conducting oxides based on AgInO2 delafossite,” Proceedings of the 2001 International Symposium on Microelectronics, (2001).

Ravindran Mohanavelu, Alan P. Constant, and David P. Cann, “Synthesis and characterization of pyrochlore compounds for transparent conductor applications,” Proceedings of the 9th US-Japan Seminar on Dielectric and Piezoelectric Ceramics, Okinawa, Japan, p. 273-276 (1999).

Seunghwa Kwon and David P. Cann, “Capacitive response of doped CuO/ZnO heterocontacts to hydrogen,” Sensors Letters 3(3), p. 258 - 262 (2005).

Seymen Aygün and David P. Cann, “Response kinetics of doped CuO/ZnO heterocontacts,” Journal of Physical Chemistry B 109 [16] p. 7878-7882 (2005).

Seymen Aygün and David P. Cann, “Hydrogen sensitivity of doped CuO/ZnO heterocontacts,” Sensors and Actuators B 106 [2] p. 836-841 (2005).

David P. Cann and Seymen Aygün, “Smart chemical sensors based on ceramic heterocontacts,” Proceedings of the International Conference on Smart Materials, December 2004, (in press).

Charles T. Chao, David P. Cann, R. Bruce Gall, and Yuksel Palaci, “High-field grain boundary transport phenomena in PTCR BaTiO3 ceramics,” Journal of Physics: D Applied Physics 37 [3] p. 416-421 (2004).

David P. Cann, Charles T. Chao, and R. Bruce Gall, “Microstructure and grain boundary effects on the high-field electrical properties of PTCR barium titanate,” Proceedings of the 10th US-Japan Seminar on Dielectric and Piezoelectric Ceramics, Providence, RI., p. 379-383, (2001).

David P. Cann and Clive A. Randall. “Electrode effects in positive temperature coefficient and negative temperature coefficient devices measured by complex-plane impedance analysis,” Journal of Applied Physics 80 [3] p. 1628-1632 (1996).

Interfacial Phenomena David P. Cann and Clive A. Randall , “Segregation in bimetallic alloys and its influence on wetting on a positive temperature coefficient resistor BaTiO3 ceramic,” Journal of Applied Physics 90 [11] p. 5698-5702 (2001).

David P. Cann, Jon-Paul Maria, and Clive A. Randall, “Relationship between wetting and electrical contact properties of pure metals and alloys on semiconducting barium titanate ceramics,” Journal of Materials Science 36 [20] p. 4969-4976 (2001).

David P. Cann and C. A. Randall, “Thermochemistry and electrical contact properties at the interface between semiconducting BaTiO3 and (Au-Ti) electrodes,” Journal of Materials Research 12 [7] p. 1685-1688 (1997).

David P. Cann and Clive A. Randall, “The thermochemistry and non-Ohmic electrical contacts of a BaTiO3 PTCR ceramic,” IEEE Transactions in Ultrasonics, Ferroelectrics, and Frequency Control 44 [6] p. 1405-1408 (1997)

David P. Cann, Clive A. Randall, “Thermochemistry of electrodes in electroceramic applications,” Proceedings of the SPIE-International Society of Optical Engineering 3235 (Proceedings 1997 International Symposium on Microelectronics) p. 368-373 (1997).

David P. Cann and Clive A. Randall, “Thermochemistry and electrical contact behavior of electrode-thermistor interfaces,” Materials Research Society Symposium Proceedings 458 (Interfacial Engineering for Optimized Properties) p. 139-144 (1997).

Seymen Aygün, Sarah Shiley, and David P. Cann, “Synthesis and electrical properties of Sr4Mn2CuO9 ceramics,” Materials Letters 58 [27-28] p. 3645-3647 (2004).

Tiffany Byrne and David P. Cann, “Effects of silver on barium titanate as a function of stoichiometry,” Journal of the American Ceramic Society 87 [5] p. 875-880 (2004).

David P. Cann, Ross Martin, Christi Taylor, and Naratip Vittayakorn, “Conductivity anomaly in CuInGaO4 and CuIn2Ga2O7 ceramics,” Materials Letters 58 [16] p. 2147-2151 (2004).

Wai Y. Leung, Henry Kang, Kristen Constant, David Cann, Chang Hwan Kim, Rana Biswas, Mihail M. Sigalas, and Kai-Ming Ho, “Fabrication of photonic band gap crystal using microtransfer molded templates,” Journal of Applied Physics 93 [10] p. 5866-5870 (2003).

Vladimir E. Yudin, Joshua U. Otaigbe, Bruce A. Cook, David P. Cann, and V.N. Artemieva, "Polyimide foam composites for thermal and electrical insulation: processing and properties" Proceedings of 7th International Conference on Polymers in Electronic Packaging, October 18-20, McAfee, N.J., USA., p. 41- (2000).